12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX

Vinologix

12-bottle BeerBOX

30 items

€96,15 EUR
€79,46 excl. VAT
Tax included.

Very sturdy packaging with a buffer all around for 12 bottles of up to 6 x 6 cm and 23 cm high. There is some space, allowing for combinations with a few slightly wider bottles or cans. This packaging is also suitable for 12, 18, or 24 Heineken-sized beer cans (diameter 65 mm). You can also combine bottles and cans. Thanks to the buffer, this packaging also offers excellent protection in the event of a fall on its side.

Contents per set:

a. The BEER12 outer box. Supplied in bundles of 15 pieces, so you will receive 2 bundles per order unit.

b. BeerInsert Part B partition as a length partition: 4 pieces, so 120 pieces per order unit.

c. Part B partition BeerInsert Part C as width partition: 5 pieces, therefore 150 pieces per order unit

The Part B partitions are supplied in sets of 10, the Part C partitions in sets of 12; the partitions are easy to break apart.


Details

Suitable for: 12 beer bottles or 24 beer cans (diameter 65mm)
Order unit: 30 pieces
Internal compartment dimensions: 6 x 6 x 23 cm (lxwxh)
Quality: Double-walled. Also the interior
Folding instructions

You can see the dividers in the photo. Take 4 lengthwise dividers Part B and 5 widthwise dividers Part C. Assemble the compartment divider:

Step 1: Take 2 lengthwise dividers Part B and place the 5 widthwise dividers Part C inside them, see photo
Step 2: Turn the compartment divider upside down and insert the 2 remaining lengthwise dividers Part B into the slots, see photo
Step 3: Place the box over it and turn the whole thing upside down, see photo.

If you want to include 12 or 24 beer cans with a diameter of 65 mm, omit 2 lengthwise dividers and 2 widthwise dividers. This creates 2 large compartments, each of which fits exactly 6 cans, or 12 cans if you stack them on top of each other. Use the remaining dividers to reinforce the sides, see the 2 photos.

You can also combine 6 bottles with 6 or 12 beer cans. You omit the two inner longitudinal dividers and the two adjacent inner transverse dividers. See the last two photos. You place a longitudinal divider in the position of the middle transverse divider. That longitudinal divider will then protrude. You place the two transverse dividers in the position of the two longitudinal dividers. This gives you six compartments of 6 by 6 cm for bottles and one larger compartment. You place this assembly in the outer box, bending the protruding part of the longitudinal divider against the wall of the large compartment. You place the beer cans in the large compartment, bending the protruding parts of the transverse dividers along the longitudinal divider; see the last two photos. Use the remaining longitudinal divider to reinforce the walls along the large compartment.