24-fles BierBOX
24-fles BierBOX

Vinologix

24-bottle BeerBOX

30 items

€198,45 EUR
€164,01 excl. VAT
Tax included.

Very sturdy packaging with a buffer all around for 24 bottles or 48 beer cans.

Outer box and inner lining made of double-walled corrugated cardboard. Thanks to the buffer, this packaging also offers excellent protection in the event of a fall on its side. Order unit: 30 pieces.

Contents per package:

a. The BEERBOX24 outer box. Supplied in bundles of 15 pieces, so 2 bundles per order unit.

b. BeerInsert Part A divider as a length divider: 5 pieces, so 150 pieces per order unit.

c. BeerInsert Part B divider as a width divider: 7 pieces, so 210 pieces per order unit.

The dividers are supplied in sets of 10 attached to each other; they are easy to break apart.

Details

Suitable for: 24 beer bottles or 48 beer cans (diameter 65mm). There is some clearance, allowing for a combination with a few slightly wider bottles.

Order unit: 30 pieces
Folding instructions

You need 5 BeerInsert Part A dividers and 7 BeerInsert Part B dividers (see photo). Seal the bottom of the outer box with strong tape. Assemble the divider:

Step 1: Take 2 length dividers Part A and place the 7 width dividers Part B inside them, see photo
Step 2: Turn the divider upside down and place the remaining 3 length dividers Part A in the slots, see photo
Step 3: Place the box over it and turn the whole thing upside down, see photo

If you want to use the packaging for Heineken-sized beer cans, omit 2 length dividers and 3 width dividers, creating 6 compartments of 12.5 by 12.5 cm. Use the remaining dividers to reinforce the sides, see the photos.

You can also combine 12 bottles with 12, 18, or 24 beer cans. You omit the 2nd and 4th longitudinal dividers (the middle divider remains in place) and, additionally, 2 adjacent transverse dividers. You place these transverse dividers in the position of the 2 longitudinal dividers. There are then 12 compartments for bottles and 2 large compartments; see the last 2 photos. You place the dividers in the outer box and put the cans in the large compartments, bending the protruding parts of the transverse dividers along the middle divider; see the last photo. You use the 2 remaining longitudinal dividers to reinforce the walls next to the large compartments.