12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX
12-fles BierBOX

Vinologix

12-bottle BeerBOX

30 stuks

€95,40 excl. btw
Tax included.
Very sturdy packaging with a protective cushioning all around, suitable for 12 bottles up to 6 by 6 cm and 23 cm high. There's some room for expansion, allowing for combinations with slightly wider bottles or cans. This packaging is also suitable for 12, 18, or 24 Heineken-sized beer cans (65 mm diameter). You can also combine bottles and cans. Thanks to the cushioning, this packaging also offers excellent protection if dropped on its side.
Contents per set:

a. The BEER12 outer box. Comes in bundles of 15 pieces, so you receive 2 bundles per order.

b. BeerInsert Part B shot as a lengthwise shot: 4 pieces, so 120 pieces per order unit

c. BeerInsert Part C shot as a width shot: 5 pieces, so 150 pieces per order unit

The BeerInsert Part B baffles are supplied in packs of 10 pieces connected together, the BeerInsert Part C baffles are supplied in packs of 12 pieces connected together, the baffles are easy to break off.
Details

Suitable for: 12 beer bottles or 24 beer cans (diameter 65mm)
Order unit: 30 pieces
Internal compartment dimensions: 6 x 6 x 23 cm (lxwxh)
Quality: Double wave. Also the interior
Vouwinstructie

The photo shows the bulkheads. Take 4 lengthwise bulkheads, Part B, and 5 widthwise bulkheads, Part C. Assemble the compartment divider:

Step 1: Take 2 lengthwise partitions Part B and place the 5 widthwise partitions Part C in them, see photo
Step 2: Turn the compartment divider upside down and insert the 2 remaining lengthwise partitions Part B into the slots, see photo
Step 3: Place the box on top and turn the whole thing upside down, see photo.

If you want to ship 12 or 24 beer cans with a diameter of 65 mm, omit two lengthwise and two widthwise partitions. This will create two large compartments, each holding exactly 6 cans, and 12 cans stacked on top of each other. Use the remaining partitions to reinforce the sides; see the two photos.

You can also combine 6 bottles with 6 or 12 beer cans. You omit the two inner lengthwise dividers and the two adjacent inner widthwise dividers. See the last two photos. Place a lengthwise divider in place of the middle widthwise divider. This lengthwise divider will then protrude. Place the two widthwise dividers in place of the two lengthwise dividers. This gives you six compartments of 6 by 6 cm for bottles and one larger compartment. Place this assembly in the outer box, bending the protruding part of the lengthwise divider against the wall of the larger compartment. Place the beer cans in the larger compartment, bending the protruding parts of the widthwise dividers along the lengthwise divider (see the last two photos). Use the remaining lengthwise divider to reinforce the walls along the larger compartment.